A Cisco switch is not accessible from the network. You need to view its running configuration.
Which out-of-band method can you use to access it?
Correct Answer:B
Out-of-band management
When a Cisco switch is not accessible from the network, the recommended out-of-band method to access its running configuration is through the console port. Out-of-band management involves accessing the network device through a dedicated management channel that is not part of the data network. The console port provides direct access to the switch??s Command Line Interface (CLI) without using the network, which is essential when the switch cannot be accessed remotely via the network12.
References :=
✑ Out-of-band (OOB) network interface configuration guidelines
✑ Out of band management configuration
=========================
DRAG DROP
Move each protocol from the list on the left to its correct example on the right.
Solution:
The correct matching of the protocols to their examples is as follows:
✑ DHCP: Assign the reserved IP address 10.10.10.200 to a web server at your company.
✑ DNS: Perform a query to translate companypro.net to an IP address.
✑ ICMP: Perform a ping to ensure that a server is responding to network connections.
Here??s how each protocol corresponds to its example:
✑ DHCP (Dynamic Host Configuration Protocol) is used to assign IP addresses to
devices on a network. In this case, DHCP would be used to assign the reserved IP address 10.10.10.200 to a web server.
✑ DNS (Domain Name System) is used to translate domain names into IP
addresses. Therefore, to translate companypro.net to an IP address, DNS would be utilized.
✑ ICMP (Internet Control Message Protocol) is used for sending error messages and
operational information indicating success or failure when communicating with another IP address. An example of this is using the ping command to check if a server is responding to network connections.
These protocols are essential for the smooth operation of networks and the internet.
✑ Perform a query to translate companypro.net to an IP address.
✑ Assign the reserved IP address 10.10.10.200 to a web server at your company.
✑ Perform a ping to ensure that a server is responding to network connections.
✑ DNS (Domain Name System): DNS translates human-friendly domain names like "companypro.net" into IP addresses that computers use to identify each other on the network.
✑ DHCP (Dynamic Host Configuration Protocol): DHCP automatically assigns IP addresses to devices on a network, ensuring that no two devices have the same IP address.
✑ ICMP (Internet Control Message Protocol): ICMP is used for diagnostic or control
purposes, and the ping command uses ICMP to test the reachability of a host on an IP network.
References:
✑ DNS Basics: What is DNS?
✑ DHCP Overview: What is DHCP?
✑ ICMP and Ping: Understanding ICMP
Does this meet the goal?
Correct Answer:A